Programmable AC Power Source Model 6400 Series

ProgrammableACPowerSource
Key Features
  • Output Rating:
    • Power:
      • 1500VA, 1ø (6415)
      • 2000VA, 1ø (6420)
      • 3000VA, 1ø (6430)
      • 6000VA, 1ø (6460)
      • 2000VA, 1ø or 3ø (6463)
      • 9000VA,1øor 3ø (6490)
    • Voltage:
      • 0~150V/0~300V/Auto (6404, 6415, 6420, 6430)
      • 0~150V/0~300V (parallel) (6460)
      • 0~300V/0~500V (serial) (6460)
      • 0~150V/0~300V (6463, 6490)
  • Output distortion less than 0.3%, and peak repetitive current over 2.5 times for rms current 
  • High accuracy measurement for RMS voltage,RMS current, true power, frequency, power factor, and current crest factor
  • Built-in power factor correction circuit provides input power factor over 0.98 to meet IEC regulations
  • Programmable current limit
  • Built-in output isolation relays
  • EEPROM storage for user defined voltage and frequency combinatio for instant recall at anytime
  • Optional GPIB, RS-232, and Analog Programming Interface
  • Over voltage, under voltage, over power, over current, over temperature, and short circuit protection
  • Temperature controlled fan speed
  • Self-test at power-on
  • User-definable power-on state

Chroma 6400 Series Programmable AC Power Source uses state of the art PWM technology to deliver pure, instrument grade AC power at very low cost ever achieved before. The 6400 AC power source offers maximum rated power for the output voltage from 0 to 300VAC, at the frequency from 45 to 1kHz. It is not only suitable for commercial applications (47-63Hz), but also for avionics, marine, and military applications at 400Hz.

The 6400 Series Programmable AC Power Source generates very clean output with typical distortion less than 0.3%. With the incorporated of power factor correction circuit, the 6400 AC Power Source yields higher effciency and delivers more output power than competitive instruments. Furthermore, it is capable of providing high peak repetitive current that is required to drive most electronic products with high crest factor input design.

The 6400 AC Power Source uses advanced DSP circuit to offer precision and high-speed measurement for true RMS voltage, true RMS current, true power, frequency, power factor, and current crest factor.

The 6400 AC Power Source is very easy to operate through the front panel keypad, or the remote controller via GPIB, RS-232 or APG (Analog Programming) interface. The optional interface is designed as a plug-in card to change the unit in seconds into a computer controlled system power source.

Designed with self-diagnostic routine and protections against over voltage, under voltage, overpower, over current, over temperature and fan fail, the instrument has the qualities and reliability that can suit for the most demanding applications in production tests, R&D design, and QA verication.

 Applications


Product Inquiry

All specifications are subject to change without notice.
Selection
Model
Description

Programmable AC Power Source

Programmable AC Power Source 0-300V/45-1000Hz/1500VA

Programmable AC Power Source 0-300V/45-1000Hz/2000VA

Programmable AC Power Source 0-300V/45-1000Hz/3000VA

Programmable AC Power Source 0-300V/45-1000Hz/6000VA, Output 1Ø, Input 3Ø 220V

Programmable AC Power Source 0-300V/45-1000Hz/6000VA, Output 1Ø, Input 3Ø 380V

Programmable AC Power Source 0-300V/45-1000Hz/6000VA, Output 1Ø or 3Ø Selectable, Input 3Ø 220V

Programmable AC Power Source 0-300V/45-1000Hz/6000VA, Output 1Ø or 3Ø Selectable, Input 3Ø 380V

Programmable AC Power Source 0-300V/45-1000Hz/9000VA, Output 1Ø or 3Ø Selectable, Input 3Ø 220V

Programmable AC Power Source 0-300V/45-1000Hz/9000VA, Output 1Ø or 3Ø Selectable, Input 3Ø 380V

Universal Socket Center for Model 6415/6420/6430 Series

Remote Interface for Model 6415/6420/6430 Series (External V Input, RS-232 Interface, GPIB Interface)

Remote Interface for Model 6404 Series (External V Input, RS-232 Interface, GPIB Interface)

Softpanel for Model 6400 Series