Quick Menu

Battery Pack / Module Test Solutions

16CHBatteryCellSimulator Model87001
  • CE Mark
  • Rohs 2 Compliant
16CH Battery Cell Simulator
Model 87001
  • Operating mode: CC/CP
  • Channel power: 25W, Channel voltage: 5V, Channel current: 5A (parallelable)
  • Bidirectional power supply design
  • 480-cell battery pack voltage simulation ability (connected in series)
RegenerativeBatteryPackTestSystem Model17020
  • CE Mark
Regenerative Battery Pack Test System
Model 17020
  • Voltage 20V/60V/100V/200V/500V for EV, storage battery pack/module test
  • Max 60 independant channels, parallel for high current
RegenerativeBatteryPackTestSystem Model17040
  • CE Mark
  • Taiwan Excellence 2019
Regenerative Battery Pack Test System
Model 17040
  • Voltage range: 60~1000V, Current range : 0~750A, Power range : 0~300kW
  • Accuracy current / voltage measurement (±0.05%FS / ±0.02%FS)
  • Multiple voltage / current ranges for auto ranging function
  • Conforms to international standards for battery testing: IEC, ISO, UL, and GB/T, etc
     
RegenerativeBatteryPackTestSystem Model17040E
  • CE Mark
  • Rohs 2 Compliant
Regenerative Battery Pack Test System
Model 17040E
  • High-power testing equipment up to 1,700V/ 4800A/ 1.2MW
  • Multiple safety protections for personnel safety risk management and control of battery testing
  • Flexible Integration for automated battery verification solutions
BatteryPackPowerHILTestbed Model8610
Battery Pack Power HIL Testbed
Model 8610
  • Simulate Fault injection and improve ISO 26262 functional safety test.
  • Support vehicle model import to verify battery dynamic behavior.
  • Support CAN、CAN FD、LIN communication interfaces.
  • Independent PLC real-time monitor to ensure testing safety.
BatterySimulatorSoftPanel ModelA170202
Battery Simulator SoftPanel
Model A170202
  • Multi-channel battery packs simulation.
  • Follow the battery cell curve behavior to simulate battery state.
  • Able to set frequently used parameters for battery pack and rapidly customize initial output state.

Battery Pack Manufacture Test Solutions

HighPowerDCElectronicLoad Model63200ASeries
  • CE Mark
  • Rohs 2 Compliant
High Power DC Electronic Load
Model 63200A Series
  • Rated power: 2kW, 3kW, 4kW, 5kW, 6kW, 12kW, 18kW, 24kW, Max. 240kW (Parallel)
  • Voltage Range: 0-150V, 0-600V, 0-1200V
  • User Defined Waveform (UDW)
  • Sync. Dynamic Control
BatteryPackATS Model8720
  • CE Mark
Battery Pack ATS
Model 8720
  • Specifically designed for battery production line, or battery development testing.
  • Increases QA efficiency by up to 80% 
  • Inspection of BMS functions, connector withstand voltage, consistency, and performance of battery module
  • Charge/discharge power range: 5kW ~ 350kW
  • Charge/discharge voltage/current range: 0V~900V/0A~1000A
16CHBatteryCellSimulator Model87001
  • CE Mark
  • Rohs 2 Compliant
16CH Battery Cell Simulator
Model 87001
  • Operating mode: CC/CP
  • Channel power: 25W, Channel voltage: 5V, Channel current: 5A (parallelable)
  • Bidirectional power supply design
  • 480-cell battery pack voltage simulation ability (connected in series)
BatteryPackFunctionATS Model8720
Battery Pack Function ATS
Model 8720
  • BMS Function Test, Battery (failure) Simulator
  • It is for testing the function of battery pack in the production line. 
  • Inspect battery module performance.
RegenerativeBatteryPackTestSystem Model17040E
  • CE Mark
  • Rohs 2 Compliant
Regenerative Battery Pack Test System
Model 17040E
  • High-power testing equipment up to 1,700V/ 4800A/ 1.2MW
  • Multiple safety protections for personnel safety risk management and control of battery testing
  • Flexible Integration for automated battery verification solutions

Li-ion Battery Cell Reliability Test

BatteryReliabilityTestSystem Model17010
  • CE Mark
Battery Reliability Test System
Model 17010
  • High accuracy up to ±0.015% of F.S.
  • Fast current response <100μS
  • Single transient sampling rate up to 1mS
  • High sampling rate up to 10mS
  • Integrating up to 96CHs
  • Channel parallel output up to 1200A
BatteryReliabilityTestSystem Model17010H
  • CE Mark
Battery Reliability Test System
Model 17010H
  • High accuracy ±0.015% of F.S.
  • High precision ±0.005% of F.S.
  • Multiple current range 300A/150A/30A
  • Charge and discharge with zero crossover time
  • 200% pulse current
  • Level 2 V. Protection

Battery Pack/Module Safety Test Solutions

ElectricalSafetyAnalyzer Model19032/19032-P
  • CE Mark
  • Rohs 2 Compliant
  • TUV
Electrical Safety Analyzer
Model 19032/19032-P
  • 5 In 1 (ACV/DCV/ IR/GB/LC Test)
  • 500VA Power Rating
  • Twin-Port function
  • Open / Short Check(OSC)
WoundComponentESTScanner Model19035Series
  • CE Mark
  • Rohs 2 Compliant
Wound Component EST Scanner
Model 19035 Series
  • 4 in 1 (AC/DC/IR/DCR Test)
  • 8 Channel Scanner
  • 5kV Insulation Resistance test
  • High speed contact check
HipotTester Model19070Series
  • CE Mark
  • Rohs 2 Compliant
  • TUV
  • UL
Hipot Tester
Model 19070 Series
  • Economy type
  • 3 In 1 (ACV/DCV/IR Test)
HipotAnalyzer Model19055/19055-C
  • CE Mark
  • Rohs 2 Compliant
Hipot Analyzer
Model 19055/19055-C
  • Hipot test
    ACW 5kV/100mA
    DCW 6kV/25mA 
  • Insulation Resistance test
    5kVmax
    1MΩ~50GΩ 
  • 500VA output