衝擊機 Linear Shock Machine GHI LSM-100

衝擊機LinearShockMachine
產品特色
  • True horizontal motion, great for testing HDD's, electronic modules, crash sensors, MEMS devices, etc.
  • Half-sine programmable using elastomer MEP's (Modular Elastomer Programmer), sheet felt, and other materials including sheets of paper.
  • User adjustable peak amplitudes using calibrated table release position scale.

 GHI Linear Shock Machine 衝擊機

為小物件的水平衝擊機,Duration的要求不同,可提供數百到上千G的衝擊力,相對於其他衝擊機,此為輕薄可攜帶式的衝擊機選擇。

Mechanical

Type Portable, Accelerated, Programmed Impact
Orientation Horizontal Translation
Test Item Weight 3kg (6.6 lbs) normal
Deminsions 120cm L, 34cm H, 41cm W(50"x13.5"x16")
Weight 75Kg, (165 lbs)
Seismic Mass 45Kg, (99 lbs)
Table Surface 25.4cm x 25.4cm (10" x 10")
Table Mounting Holes M6 x 1mm pitch, 25mm grid
Operation Dry compressed air, 4Kg/cm sq.(100-120 psi)
Safety Feature Remote air value operation, safety interlocked clear plastic cover.

 

Performance

Velocity Change Limits 635cm/sec(250"/sec) maximum to 63.5cm2/sec(25"/sec) minimum
Pulse Shapes Nominal Haversines
Filter Frequencies Suggested 5KHz to 10KHz rolloffs, depending on pulse durations
Pulse Durations 0.1ms

 

Bundled Data Acquisition

GHI 4 channel MiniWinCAT card and Level 1 time domain software for peak amplitude, duration, velocity change, double integral of acceleration plots and reports. Also includes 1,000g shock accelerometer & cables. Can also be furnished with WinSRS, and WinMilSpec Tolerance Bar S/W.


產品詢價

所有規格如有更改,恕不另行通知。
選擇
型號
敘述

衝擊機 Linear Shock Machine