Regenerative Battery Pack Test System Model 17030
- Supports high power battery certification : IEC, SAE, GB, etc.
- Regenerative battery discharge, Saves energy, environment-friendly and provides low heat dissipation
- Driving cycle simulator
- Industry Leading Accuracy
- 10ms Data acquisition
- Charge / discharge mode
- Constant Current
- Constant Voltage
- Constant Power
- Customized rating power
- Voltage range：10~1200V
- Current range：0~1000A
- Power range：90~500kW
- System Integration:
- Chamber Control
- Multi-channels voltage/temperature measurement (Max 256CH)
- BMS Communication
Chroma's 17030 is an automated regenerative test system specifically designed for high power battery pack tests. Accurate power sources and measurements ensure test quality suitable for repetitive and reliable testing of crucial battery packs. Applications include incoming inspections capacity validation, production and certification testing.
Chroma's 17030 system architecture offers regenerative discharging designed to recycle the electric energy sourced by the battery pack. This feature saves electricity, reduces the facilities costs, reduces the thermal foot print and provides a green solution by reducing the environmental impact to the planet.
Chroma's 17030 system include a driving cycle simulation function. Since automotive battery packs are used at quick and irregular intervals, the 17030 incudes the capability to create seamless transitions between maximum charge and maximum discharge (or maximum discharge and maximum charge) with a rapid 50 ms conversion.
This feature allows for charge/discharge mode simulations of real world driving scenarios. The system simulates the real conditions on the battery pack in its working condition.
Chroma's 17030 system has Fexible programming functions and includes Chroma's powerful Battery Pro software. Battery Pro is a user friendly software environment allowing for the creation of a wide range of test scenarios from basic charge and discharge to complex drive cycle testing. Battery Pro's features allows quick and intuitive test development to eliminate the need for tedious scripting or programming by a software developer.
There are multiple safety features built into the 17030 including battery polarity checks, overvoltage protection, overcurrent protection and over temperature protection. In the unlikely event of a power or computer communication loss, the data is securely stored within the system in non-volatile memory thereby protecting against potential data loss and allowing for continuous flow after restart.
KEY SYSTEM FEATURES
- Regenerate power to grid, Low heat dissipation, reduce air-conditioner loads and facility power consumption
- THD under 5% at rated power
- The PF over 0.9 at rated power
- Efficiency above 85% when operated above 20% of rated power
Driving Cycle Simulation (Power/ Current Waveform mode)
Simulate real automotive working conditions by defining quick and irregular charging and discharging conditions.
- Import dynamic charge/discharge waveforms to simulate the DRIVE CYCLE or other actual applications via .xls file formats
- Supports 720,000 points within driving profile memory for saving profiles of each channel
- Minimum transition time (Δt) = 10ms
Customized rated power
17030 design allows for customized power levels.
- Channels are easily paralleled with same model to support higher current requirements. This feature provides ultimate flexibility between high channel count and high current testing. (Supports a maximum of 4 units)
- Dual output in one system, independent control
High accuracy capacity calculation
Voltage/current sampling rate of 50kHz used for calculations of capacity ratings in current waveform mode.
- V/I sampling rate : 50KHz
- Minimum data acquisition: 10ms
- Integrate calculus : For I : Capacity, - For V x I : Energy
Charge / discharge mode
Data Recovery Function
The 17030 Test system is specifically designed to meet the various requirements for testing secondary battery packs with high safety and stability. Charge and discharge protection aborts tests when abnormal conditions are detected. Data loss, storage and recovery are protected against power failure.
- Real-time battery pack status browse
- Icon Manager: Test status of each channel is managed through different icons, easy to read and understand
- Authority management: Allows for multiple user authority
- Fault record tracking: Records abnormal states of each channel independently
- 255 charge/discharge conditions
- Sets dual layer loops (cycle & loop) with 9999 loops per layer
- Ability to edit dynamic charge/discharge waveform
- 10ms current switching speed in waveform current mode
- Testing modes: CV／CC／CP／CC-CV／Waveform current／DCIR)
- Cut-off conditions (time, current, capacity, cut-off voltage, cut-off current, etc.)
- Generate the detailed report and step report
- Customized report format
- Exports test reports in PDF, CSV and XLS
- Graphical report function
- Report analysis Function: Users can create customized reports such as life-cycle report, Q (AH)-V(V) report, V(V)/I(A)/T( ℃)-time report⋯etc through the user-defined X and Y axis parameters
- Real-time browsing test reports of each channel
- Diversified reports & charts: Real-time report, Cut-off report, X-Y scatter chart report