The biggest advantage of an integrated battery cell test solution is the combination of test instruments, automated logistics, and manufacturing information management. The entire process of battery cell formation is incorporated into a line by moving the battery cell to each test station for automated barcode binding, charging and discharging, OCV/ACR/DCIR tests, NG selection, AOI, and grading.

Charging and discharging tests are necessary to evaluate the performance and health of lithium batteries. Such tests require a battery reliability test system with accurate measurements, stable, safe, and convenient operation. Chroma offers battery test systems that meet all these criteria, while also providing customized plans and after-sales service around the globe.

Chroma's battery module and pack test solutions contain a charge and discharge cycler with BMS communication and a wide power range that suits EV energy storage. In accordance with the demands for battery verification or production, the number of test channels and power can be flexibly configured to regenerate the discharged energy back to the grid. Seamless and fast conversion between charging and discharging current enables simulating the actual battery usage scenarios. Accurate measurement and high-frequency sampling facilitate correct analysis of the battery life. The BMS and the battery pack end of line test system can be widely used in battery pack production lines, providing a programmable software platform and customized test items to efficiently verify battery characteristics, signal communication, and protection functions.

Quick Menu

Battery Pack / Module Test Solutions

16CHBatteryCellSimulator Model87001
  • CE Mark
  • Rohs 2 Compliant
16CH Battery Cell Simulator
Model 87001
  • Operating mode: CC/CP
  • Channel power: 25W, Channel voltage: 5V, Channel current: 5A (parallelable)
  • Bidirectional power supply design
  • 480-cell battery pack voltage simulation ability (240 cells in series and 2 cells in parallel)
RegenerativeBatteryPackTestSystem Model17020
  • CE Mark
Regenerative Battery Pack Test System
Model 17020
  • Voltage 20V/60V/100V/200V/500V for EV, storage battery pack/module test
  • Max 60 independant channels, parallel for high current
RegenerativeBatteryPackTestSystem Model17020E
Regenerative Battery Pack Test System
Model 17020E
  • Charge/discharge modes (CC, CV, CP)
  • Power: 10kW, 20kW per channel (Up to 80kW by parallel)
  • Voltage: 60V,100V, 200V
  • Current: 180A, 100A per channel (Up to 800A by parallel)
RegenerativeBatteryPackTestSystem Model17040
  • CE Mark
  • Taiwan Excellence 2019
Regenerative Battery Pack Test System
Model 17040
  • Voltage range: 60~1000V, Current range : 0~750A, Power range : 0~300kW
  • Accuracy current / voltage measurement (±0.05%FS / ±0.02%FS)
  • Multiple voltage / current ranges for auto ranging function
  • Conforms to international standards for battery testing: IEC, ISO, UL, and GB/T, etc
     
RegenerativeBatteryPackTestSystem Model17040E
  • CE Mark
  • Rohs 2 Compliant
Regenerative Battery Pack Test System
Model 17040E
  • High-power testing equipment up to 1,700V/ 4800A/ 1.2MW
  • Multiple safety protections for personnel safety risk management and control of battery testing
  • Flexible Integration for automated battery verification solutions
BatteryPackPowerHILTestbed Model8610
Battery Pack Power HIL Testbed
Model 8610
  • Simulate Fault injection and improve ISO 26262 functional safety test.
  • Support vehicle model import to verify battery dynamic behavior.
  • Support CAN、CAN FD、LIN communication interfaces.
  • Independent PLC real-time monitor to ensure testing safety.
BatterySimulatorSoftPanel ModelA170202
Battery Simulator SoftPanel
Model A170202
  • Multi-channel battery packs simulation.
  • Follow the battery cell curve behavior to simulate battery state.
  • Able to set frequently used parameters for battery pack and rapidly customize initial output state.

Battery Pack Manufacture Test Solutions

HighPowerDCElectronicLoad Model63200ASeries
  • CE Mark
  • Rohs 2 Compliant
High Power DC Electronic Load
Model 63200A Series
  • Rated power: 2kW, 3kW, 4kW, 5kW, 6kW, 12kW, 18kW, 24kW, Max. 240kW (Parallel)
  • Voltage Range: 0-150V, 0-600V, 0-1200V
  • User Defined Waveform (UDW)
  • Sync. Dynamic Control
BatteryPackATS Model8720
  • CE Mark
Battery Pack ATS
Model 8720
  • Specifically designed for battery production line, or battery development testing
  • Increases QA efficiency by up to 80% 
  • Inspection of BMS functions, connector withstand voltage, consistency, and performance of battery module
  • Charge/discharge power range: 5kW ~ 350kW
  • Charge/discharge voltage/current range: 0V~900V/0A~1000A
BatteryModuleWeldingCheckATS Model8700
  • CE Mark
Battery Module Welding Check ATS
Model 8700
  • Inspects BMS functions
  • Inspects open circuit voltage (OCV), DC resistance (DCIR)
  • Inspects consistency of string battery cells
16CHBatteryCellSimulator Model87001
  • CE Mark
  • Rohs 2 Compliant
16CH Battery Cell Simulator
Model 87001
  • Operating mode: CC/CP
  • Channel power: 25W, Channel voltage: 5V, Channel current: 5A (parallelable)
  • Bidirectional power supply design
  • 480-cell battery pack voltage simulation ability (240 cells in series and 2 cells in parallel)
BatteryPackFunctionATS Model8720
Battery Pack Function ATS
Model 8720
  • BMS Function Test, Battery (failure) Simulator
  • It is for testing the function of battery pack in the production line. 
  • Inspect battery module performance.
RegenerativeBatteryPackTestSystem Model17040E
  • CE Mark
  • Rohs 2 Compliant
Regenerative Battery Pack Test System
Model 17040E
  • High-power testing equipment up to 1,700V/ 4800A/ 1.2MW
  • Multiple safety protections for personnel safety risk management and control of battery testing
  • Flexible Integration for automated battery verification solutions

Li-ion Battery Cell Reliability Test

Li-BatteryCycleTestAutomationSystem Model5603-K001
Li-Battery Cycle Test Automation System
Model 5603-K001
  • 64-channel semi-automatic test system for soft-packing lithium batteries
  • For charge/discharge, DCIR, and OCV testing
  • High-precision current, voltage, power, electric charge, energy, resistance measurements
  • For use in product development of lithium batteries
BatteryReliabilityTestSystem Model17010
  • CE Mark
Battery Reliability Test System
Model 17010
  • High accuracy up to ±0.015% of F.S.
  • Fast current response <100μS
  • Single transient sampling rate up to 1mS
  • High sampling rate up to 10mS
  • Integrating up to 96CHs
  • Channel parallel output up to 1200A
BatteryReliabilityTestSystem Model17010H
  • CE Mark
Battery Reliability Test System
Model 17010H
  • High accuracy ±0.015% of F.S.
  • High precision ±0.005% of F.S.
  • Multiple current range 300A/150A/30A
  • Charge and discharge with zero crossover time
  • 200% pulse current
  • Level 2 V. Protection

Battery Pack/Module Safety Test Solutions

ElectricalSafetyAnalyzer Model19032/19032-P
  • CE Mark
  • Rohs 2 Compliant
  • TUV
Electrical Safety Analyzer
Model 19032/19032-P
  • 5 In 1 (ACV/DCV/ IR/GB/LC Test)
  • 500VA Power Rating
  • Twin-Port function
  • Open / Short Check(OSC)
WoundComponentESTScanner Model19035Series
  • CE Mark
  • Rohs 2 Compliant
Wound Component EST Scanner
Model 19035 Series
  • 4 in 1 (AC/DC/IR/DCR Test)
  • 8 Channel Scanner
  • 5kV Insulation Resistance test
  • High speed contact check
HipotTester Model19070Series
  • CE Mark
  • Rohs 2 Compliant
  • TUV
  • UL
Hipot Tester
Model 19070 Series
  • Economy type
  • 3 In 1 (ACV/DCV/IR Test)
HipotAnalyzer Model19055/19055-C
  • CE Mark
  • Rohs 2 Compliant
Hipot Analyzer
Model 19055/19055-C
  • Hipot test
    ACW 5kV/100mA
    DCW 6kV/25mA 
  • Insulation Resistance test
    5kVmax
    1MΩ~50GΩ 
  • 500VA output