Quick Menu

Flat Panel Display Test Solutions

FPDTester Model2918
FPD Tester
Model 2918
  • Support 8K Super Hi-Vision
  • Support full 8K scrolling function
  • Independent signal and power module design
FPDTesterPowerModule Model67393-120-480
FPD Tester Power Module
Model 67393-120-480
  • Low output voltage noise
  • Low current harmonic
  • High efficiency, high power density and high power
  • Self-test for failure state
  • Provide VDD/VBL for over voltage/current protection
FlatPanelDisplayTester Model27014
  • CE Mark
Flat Panel Display Tester
Model 27014
  • Modular design allows selection tailored to requirements
  • High-speed graphics processor with real-time image output
  • Built-in programmable power supply
  • Intuitive software interface
FlickerMeasuringProbeforLCMATS ModelA712306
Flicker Measuring Probe for LCM ATS
Model A712306
  • Able to integrate with LCM ATS for LCM auto flicker adjustment
  • Capable of integrating Chroma 29XX Series LCM Auto Test System
  • Support FMA and FLVL flicker measurement mode
Multi-ChannelPowerModule Model67394
Multi-Channel Power Module
Model 67394
  • OCP/OVP/UCP/UVP protection mechanism
  • High efficiency and high power density
  • Maximum 3 adjustable powers for output
  • Provide negative voltage output
LCMTester Model27013
LCM Tester
Model 27013
  • LVDS 4ch up to 330MHz 
  • Vdd output 3.3~13V/3.5A programmable
  • Vbl by pass outside DC source
  • EDID Read, Write, Compare
LCMTester Model27012
LCM Tester
Model 27012
  • LVDS 2ch up to 162MHz
  • TTL (Optional) signals output
  • 24V, 12V, 5V output for Vbl
  • 12V, 5V, 3.3V output for Vdd
LCMTester Model27011
LCM Tester
Model 27011
  • LVDS 2ch up to 162MHz
  • TTL (Optional) signals output
  • 12V, 5V output for Vbl
  • 12V, 5V, 3.3V output for Vdd

Aging Testing Solutions

eDPSignalPatternGeneratorCard Model27010P-04+A270152
eDP Signal Pattern Generator Card
Model 27010P-04+A270152
  • OCP, OVP, UCP, UVP protection mechanisms
  • Signal complies to the eDP 1.4 specifications and standards
  • Supports 1, 2, 4 lane eDP output
  • Supports 2 sets of independent AUX and HPD channe
LVDSSignalPatternGeneratorCard Model27010P-04+A270154
LVDS Signal Pattern Generator Card
Model 27010P-04+A270154
  • OCP, OVP, UCP, UVP protection mechanisms
  • Signal complies to the LVDS specifications and standards
  • Supports 1, 2, 4 CH LVDS output
  • Configurable to 6, 8, 10 bits
PatternGeneratorCard Model27010P-02+67396
Pattern Generator Card
Model 27010P-02+67396
  • Support 4 channels and LVDS, TTL, SPI, MCU signals output (each signal power has independent on/off switch)
  • Provide software application to control all test programs and signal power parameters (Timing, Pattern, Power, Program)
  • Support LVDS output bandwidth to 2 link 270 MHz x 4ch
  • Support TTL up to 1366x768 @60Hz 
SignalGeneratorCard Model2701007
Signal Generator Card
Model 2701007
  • 2 Channel sequence up to 270Mhz
  • Provide over current protection for VDD/VBL 
  • Support VBL /Vdim light adjustment
  • LED shows the present work status
SignalGeneratorCard Model2701020
Signal Generator Card
Model 2701020
  • 2 Channel, 4 Channel Programmable
  • Output 2 channel / 2 sets at the same time
  • 4 Channel sequence up to 330Mhz
  • LED to show work status at present
eDPBISTModule ModelA270149
eDP BIST Module
Model A270149
  • Support eDP to enter BIST mode for signal setting
  • Provide VDD, VBL power setting
  • Provide VDD, VBL over current protection
  • Integrate with PG Master software for parameters setting
eDPGenerator ModelA270141
eDP Generator
Model A270141
  • Support eDP enter BIST mode setting signal
  • VDD, VBL power supply setting provided
  • VDD, VBL provides OCP function
DCPowerSupplyforLCMBurn-inApplications Model67300Series
DC Power Supply for LCM Burn-in Applications
Model 67300 Series
  • High Power Density (464mW/cm3)
  • Remote Sense, 1V Line Loss Compensation
  • Remote RS-485 Interface Control
  • Cost-effective