eDP Signal Pattern Generator Card Model 27010P-04+A270152

eDPSignalPatternGeneratorCard
eDPSignalPatternGeneratorCard
eDPSignalPatternGeneratorCard
Key Features
  • VDD offers OCP, OVP, UCP, UVP protection mechanisms
  • VBL offers OCP, OVP, UCP, UVP protection mechanisms
  • Communicate with PC through a RS-485 cable
  • Burn-in (aging test) log can record the V/I measurement values and machine status of the burning-process in detail
  • Signal complies to the eDP 1.4 specifications and standards
  • Supports 1, 2, 4 lane eDP output
  • eDP supports the v1.4 defined 7 types of lane rate (1.62Gbps / 2.16Gbps / 2.43Gbps / 2.7Gbps / 3.24Gbps / 4.32Gbps / 5.4Gbps)
  • Supports manual/automatic Training modes
  • Supports Pre-emphasis settings (0dB / 3.5dB / 6dB / 9.5dB)
  • Configurable to 6, 8, 10 bits
  • VDD provides over voltage/current protection
  • Supports 2 sets of independent AUX and HPD channels
  • Output design is provided with ESD protection devices

27010P-04 is a signal module and is primarily used for burn-in aging tests. 27010P-04 can be used with a PC through a RS-485 cable and offers a Panel for operating burn-in. 

A270152 is a eDP 5.4G signal module board and complies with the eDP 1.4 signal specifications and standards. A270152 is used with the main unit 27010P-04 and can be applied to high-order eDP burn-in testing, providing eDP Panel standard signals and other related control.

Operation Guideline

  • STEP 1  Connect the Signal/VDD/VBL cable.
  • STEP 2  Connect one end of the RS-485 cable to the main unit PC, connect the other end to the hub (A270107).
  • STEP 3  Connect the DC power (16V). Then turn the POWER ON.

Product Inquiry

All specifications are subject to change without notice.
Selection
Model
Description

eDP Signal Pattern Generator Card